GN 612.8 Cam action indexing plungers Threaded body zinc die casting

Description

Specification

Types

Type A: without lock nut

Type AK: with lock nut

Threaded body

Zinc die casting

corrosion-resistant, ZNDG Pass nano^®-coating

anthracite

Steel

zinc plated, blue passivated

Lever

Plastic (Polyamide PA)

black, matt

not removable

Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The groove allows safe positioning.

These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.

Range of cam action indexing plungers

Technical information

Plastic characteristics

Load rating information

GN 612.8

Filter
Description	d₁ Pin-0.05 Bore +0.1/+0.05	d₂	l₁	l₂	l₃	l₄	A/F	Spring load in N ≈ initial	Spring load in N ≈ end	Weight
GN 612.8-4-M12x1,5-A	4	M 12 x 1.5	48	8	25	25	13	8	22	49
GN 612.8-5-M12x1,5-A	5	M 12 x 1.5	48	8	25	25	13	8	22	51
GN 612.8-6-M12x1,5-A	6	M 12 x 1.5	48	8	25	25	13	8	22	23
GN 612.8-6-M16x1,5-A	6	M 16 x 1.5	56.5	10	28	30	18	11	30	45
GN 612.8-8-M16x1,5-A	8	M 16 x 1.5	56.5	10	28	30	18	11	30	47
GN 612.8-8-M20x1,5-A	8	M 20 x 1.5	69.5	12	36	37	22	20	56	94
GN 612.8-10-M16x1,5-A	10	M 16 x 1.5	56.5	10	28	30	18	11	30	49
GN 612.8-10-M20x1,5-A	10	M 20 x 1.5	69.5	12	36	37	22	20	56	92
GN 612.8-12-M20x1,5-A	12	M 20 x 1.5	69.5	12	36	37	22	20	56	100
GN 612.8-4-M12x1,5-AK	4	M 12 x 1.5	48	8	25	25	13	8	22	29
GN 612.8-5-M12x1,5-AK	5	M 12 x 1.5	48	8	25	25	13	8	22	60
GN 612.8-6-M12x1,5-AK	6	M 12 x 1.5	48	8	25	25	13	8	22	31
GN 612.8-6-M16x1,5-AK	6	M 16 x 1.5	56.5	10	28	30	18	11	30	60
GN 612.8-8-M16x1,5-AK	8	M 16 x 1.5	56.5	10	28	30	18	11	30	59
GN 612.8-8-M20x1,5-AK	8	M 20 x 1.5	69.5	12	36	37	22	20	56	130
GN 612.8-10-M16x1,5-AK	10	M 16 x 1.5	56.5	10	28	30	18	11	30	65
GN 612.8-10-M20x1,5-AK	10	M 20 x 1.5	69.5	12	36	37	22	20	56	128
GN 612.8-12-M20x1,5-AK	12	M 20 x 1.5	69.5	12	36	37	22	20	56	130